MicroLux® X-Y Table Attachment
X-Y Table Attachment Increases Accuracy by 30 Times!
- Table position is controlled in X and Y by smooth-action zero-adjustable handwheels
- Although designed for Micro-Mark’s drill press, can be mounted on many machines
- Made of steel, aluminum, and engineering polymers
- Accurate to within .0005 of an inch using the True Inch hand wheels
- Designed and manufactured for Micro-Mark
The MicroLux® X-Y Table Attachment increases the accuracy of hole locations to within .0005 inch of true position -- 30 times better than 'eyeball' center-punching! Table positioning is controlled in the X and Y directions by smooth-acting zero-adjustable handwheels. Adjustable gibs in dovetail guides maintain accuracy and eliminate side play even after many years of use, and special retractable covers keep the lead screws free of chips. Although designed specifically for both MicroLux® Drill Presses, our table attachment can be easily mounted to other machines. Includes sliding front scale, hold-down clamps, mounting hardware and template, and hardware for mounting the #15118 Vise (sold separately). Made of steel, aluminum and engineering polymers.
|Table Size:||8-1/4 L x 2-3/4 D|
|Overall Size:||10-1/2 L x 7-1/2 D x 1-11/16 H|
|Base Size:||3-3/4 x 5-1/2|
|X Direction Travel:||5-1/4|
|Y Direction Travel:||1-3/4|
|Dial Graduations:||.001; .050 per revolution|