Caoutchouc de rebond d'usine de mousse à fil chaud, 16 oz
UGS
Des rochers rebondissants incroyables ? Ajoutez de petites quantités de revêtement en mousse tout usage à Bounce pour créer un revêtement protecteur flexible très résistant aux fissures lors de l'impact. Rend également le revêtement en mousse tout usage résistant aux intempéries, adhère encore mieux et est plus résistant avec des couches très fines. Utiliser avec 1 à 80 lb. de couche de mousse tout usage sèche.
Product specifications
| Brand | |
|---|---|
| Weight | |
| Dimensions | N/A |
| Warranty | |
| Back in Stock Date | N/A |
Instructions
Expédition & retours
Nous espérons que vous serez entièrement satisfait de votre commande... mais si un article ne répond pas à vos attentes, vous pouvez le retourner comme neuf dans les 30 jours suivant la livraison pour un remplacement, un échange ou un remboursement du prix d'achat.
More Information:
Mixing:
Use Bounce with no added water for maximum flexibility. All Purpose Foam Coat comes out more flexible when no or less water is added to the Bounce. For a super rubbery coating, try a liquidy mixture of 9 parts Bounce to one part All Purpose Foam Coat, adding the powder to the Bounce, until the desired thickness is attained.
Can also be applied alone, or with just a little bit of Foam Coat to create a strong flexible paintable sealant.
For a chip resistant coating, start with 1 part liquid to 1 part All Purpose Foam Coat, and thin or thicken as desired. Dilute the Bounce with water before mixing with Foam Coat to get a less flexible, super smooth, chip-resistant surface.
Thin layers can be applied to vertical and inverted surfaces with little or no sagging.
Applying: Fill holes with pasty mixture. To coat large areas, make a more liquidy mixture until thin enough to apply with a paint brush. May be applied as thick as 3/8 inch, but multiple coats are stronger. Looks like smooth stone when dry. Try texturing the surface before coating sets. Bounce is compatible with our Grit Texturizers (#87648 and #87469). Can be smoothed while drying, but not sandable once dry.
Set Time: Use within 15 minutes. Sets up in 30 minutes. Maximum bond and strength in 24 hours.
Clean-Up: Immediately clean tools and brushes with soapy water.
Finishing: Paint or stain as desired.Note: This item ships direct from California to contiguous 48 states only.
