Revêtement en mousse extérieur Hot Wire Foam Factory, 3 lb.
UGS
Finition dure comme la pierre pour tous vos projets de mousse extérieurs (et intérieurs). Ce truc est super dur. Ce n'est pas ponçable. A une sensation de pierre rugueuse une fois sec. Il peut être lisse à la truelle ou brossé pour obtenir une finition très rugueuse.
Caractéristiques:
• Adhère aux mousses de polystyrène.
• Forme une surface résistante aux intempéries.
• Facile à mélanger. Ajoutez simplement de l'eau.
• Utilisation au-dessus ou en dessous du niveau du sol
• Appliquer au pinceau ou à la truelle.
• Peut être peint
• Ignifuge
• De nombreuses textures de surface décoratives peuvent être créées.
• Nettoyage à l'eau et au savon.
• Ajoutez le fortifiant Boost si une force supplémentaire est souhaitée. (ne fonctionnera pas avec Bounce)
Product specifications
| Brand | |
|---|---|
| Weight | |
| Dimensions | N/A |
| Warranty | |
| Back in Stock Date | N/A |
Instructions
Expédition & retours
Nous espérons que vous serez entièrement satisfait de votre commande... mais si un article ne répond pas à vos attentes, vous pouvez le retourner comme neuf dans les 30 jours suivant la livraison pour un remplacement, un échange ou un remboursement du prix d'achat.
More Information:
MIXING: Settling may occur in shipping causing a gritty texture that does not stick well. Remix if there is separation in dry mixture. Use when temperatures are between 40°F (4°C) and 100°F (38°C). Mix in a clean container with clean water. Add about 3 parts powder to 1 part water and mix until Foam Coat turns to a smooth paste. A drier mix is stronger. Do not overmix.
APPLYING: If using extruded foam (ie Blueboard or Pinkboard) roughen surface with coarse sandpaper. Fill big cracks and holes by applying pasty mixture with a trowel. You may add more water until mixture is thin enough to apply with a paint brush, although thinning weakens coating. Can be applied with a standard spray hopper. Use thinned mixture to texture large areas. For best strength apply at least 1/4" (6mm) thick. Multiple coats may be applied. Try texturing surface before coating sets.
SET TIME: Use within 30 minutes. Sets up in 1-3 hours. Fogging the surface for 24 hours will increase strength.
FINISHING: Remove dust before painting. This product goes on rough and is not sandable. Finish as the surface is setting up.
CLEAN-UP: Clean tools and brushes with clean soapy water before coating hardens.
WARNING: Avoid prolonged contact with skin. Wear dust, skin and eye protection. Use approved respirator when sanding. In case of eye contact, flush immediately with water, consult a physician. Wash hands with soap and water after use and before eating. Keep out of reach of children.
3 LB. COVERAGE:
1/64" thick, 36 square feet
1/16" thick, 9 square feet
1/4" thick, 2.25 square feetNote: This item ships direct from California to contiguous 48 states only.
