MicroLux® High Precision Heavy Duty R8 Miniature Milling Machine
MicroLux® High Precision Heavy Duty R8 Miniature Milling Machine

Fraiseuse miniature R8 robuste de haute précision MicroLux®

$1,800.00 USD $1,599.95 USD Épargnez 11%
Frais d'expédition calculés à l'étape de paiement.

UGS

84630

Fraiseuse miniature R8 robuste et de haute précision MicroLux ® .



  • Puissant moteur sans balais de 500 W avec plus de couple
  • Seule machine « True Inch » sur le marché, vis d'alimentation de table de 0,50 pouce par tour
  • Colonne inclinable et broche entraînée par courroie
  • De nombreux accessoires sont disponibles pour offrir des fonctionnalités et des capacités améliorées
  • Mini broyeur puissant, précis et occupant moins d'espace sur le banc



* Expédition terrestre uniquement vers les 48 États américains contigus.




AVERTISSEMENT : Ce produit peut vous exposer à des produits chimiques, notamment au plomb, reconnu par l'État de Californie comme pouvant provoquer le cancer, des malformations congénitales ou d'autres problèmes de reproduction. Pour plus d'informations, rendez-vous sur : www.p65warnings.ca.gov
Product specifications
Brand MicroLux
Weight 124.84 lb
Dimensions 22.04 x 29.13 x 19.68 inches
Warranty 90 Days
Back in Stock Date N/A
Instructions

MicroLux® High Precision Heavy Duty R8 Miniature Milling Machine Instructions

MicroLux® High Precision Heavy Duty R8 Miniature Milling Machine Assembly

MicroLux® High Precision Heavy Duty R8 Miniature Milling Machine Parts Diagram
Expédition & retours

Nous espérons que vous serez entièrement satisfait de votre commande... mais si un article ne répond pas à vos attentes, vous pouvez le retourner comme neuf dans les 30 jours suivant la livraison pour un remplacement, un échange ou un remboursement du prix d'achat.
More Information:

* Ground Shipping only to the 48 contiguous U.S. states.

The Microlux R8 Benchtop Milling Machine is a drill press and Mill!

The R8 Mill comes with a True-Inch X-Y table movement, with imperial (inch) feed screws and dials (.050 inch per turn). Metric conversions are not required. Unlike our previous model mill, our R8 mill spindle is driven by a belt system rather than gear driven for one quite operation and two ease of maintenance. Checkout specs below!

Comes with:

1/2" Drilling chuck and R8 shank
Oil bottle
3 Hex wrenches
3 open end wrenches
D:45-52 Spanner wrench
T-nuts
Drawbar
Extra 5A fuse


Specifications

Max. X-axis Travel ...... 8.5" (215.9mm)
Max. Y-axis Travel ...... 4" (101.6mm)
Max. Z-axis Travel ...... 7" (177.8mm)
Headstock Tilt ............ -+ 45 degrees
Motor Power ............... 500 watts
Hours Power .............. 0.67
Spindle Speed ............ 0-2500 rpm
Spindle Taper................. R8
Stock Chuck Taper ....... JT33
Drill Cuck Capacity ....... 1/2" (13mm)
Endmill Capacity ........... 1/2" (13mm)
Face Milling Capacity ... 1" (25.4mm)
Total Gross weight ....... 127 lbs.
T-Slots Specs ............... See Page 3 of Manual


⚠️ WARNING: This product can expose you to chemicals, including Lead which is known to the State of California to cause cancer or birth defects or other reproductive harm.
For more information, go to: www.P65Warnings.ca.gov

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael T.
Great Mini-Mill, you will not regret it.

I bought this when it was 899.00, I have enjoyed using this machine because I use to be a Tool & Die maker. I am no longer one yet I do very much like using this mini-mill because it has the strength to cut metal but I would recommend keeping it to mild steel or softer.
Saying that, this little guy can cut aluminum all day long and not have a problem. If you are a professional tool maker then you may not need a digital speed readout for your spindle but since this guy is small and speed does make a big difference, I do recommend it to save you a lot of time getting the correct speed.
I recommend the Microlux High Precision Heavy Duty R8 miniature milling machine. It is a very good machine to have in your garage or shed because it is small but very useful and it only requires 110-120v outlet.
Make sure you grease down everything when not using it, after all it is steel and will rust in high humidity states.
Rotary table with 4 jaw independent chuck will be my next purchase.

A
Anonymous
High Quality and easy to use

This Mini Mill is stable, solid, abd easy to use. The R8 tooling makes for easy and quick bit changes. I mill mild steed for Tattoo Machines and have had 0 issues

P
Pablo P.
Muy til.

Wonderful Milling Machine, with performance suitable for working in mendelism.

A pity that I do not find in Spain distributors who put it up for sale, and buying it as an import represents a large increase in the price for taxes.

Load More
Recently Viewed
My Wishlist