Plasti-Zap™, 1/3 oz.
UGS
Idéal pour assembler des maquettes en plastique
Product specifications
| Brand | |
|---|---|
| Weight | |
| Dimensions | |
| Warranty | |
| Back in Stock Date | N/A |
Instructions
Expédition & retours
Nous espérons que vous serez entièrement satisfait de votre commande... mais si un article ne répond pas à vos attentes, vous pouvez le retourner comme neuf dans les 30 jours suivant la livraison pour un remplacement, un échange ou un remboursement du prix d'achat.
More Information:
Cuts through plastic mold release agents and will not chemically attack or soften plastic parts. Can be removed from plastic parts with Debonder. 15 to 30 second cure. 1/3 oz. applicator bottle.PLASTI-ZAP is a specialty CA adhesive developed for use on plastic and vinyl items. Most plastic modeling projects can be assembled with PLASTI-ZAP and very small amounts of ZIP KICKER. The special formula in PLASTI-ZAP allows it to screen out any mold release agents, resulting in a permanent bond in 15 to 30 seconds. The joint can be filed and sanded in a minute or so, allowing extra-fast assembly.Helpful Hints: Apply small drops of PLASTI-ZAP to one surface only then mate the parts. For large or long seams apply small drops 1/4 to 1/2 inches apart, one side only, along the entire seam, then join parts. Be careful to keep your fingers away from the glued joints until cured, this glue will bond your skin instantly to your model. For bonding chrome parts, scrape the chrome off of the bonding areas then apply the glue to one side only.If you want to use ZIP KICKER, apply very small amounts with a fine brush or toothpick. You do not need to apply kicker to the entire joint. For critical applications, test sample joints for desired strength requirements.
