MicroLux® High Precision Heavy Duty R8 Miniature Milling Machine MicroLux® High Precision Heavy Duty R8 Miniature Milling Machine
MicroLux® High Precision Heavy Duty R8 Miniature Milling Machine

MicroLux® High Precision Heavy Duty R8 Miniature Milling Machine

$1,599.95 USD Temporarily out of stock
Shipping calculated at checkout.

SKU

84630
Super Buy!

MicroLux® High-Precision Heavy-Duty R8 Miniature Milling Machine.


True-inch X-Y table just like our 7x16 Lathe!

  • Powerful brushless 500-watt motor,
  • Electronically controlled variable speed.
  • Direct belt drive for quieter spindle operations.
  • X-Y table for high accuracy drilling and milling, and a micro turning Z-axis movement dial.
  • Head stock can be tilted up to 45 degrees for acute angles both left and right

Want to learn more? Check out the More Product Details tab below!

* Ground Shipping only to the 48 contiguous U.S. states.
WARNING: This product can expose you to chemicals, including Lead which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to:www.p65warnings.ca.gov

More Product Details

The Microlux R8 Benchtop Milling Machine is a drill press and Mill!

The R8 Mill comes with a True-Inch X-Y table movement, with imperial (inch) feed screws and dials (.050 inch per turn). Metric conversions are not required. Unlike our previous model mill, our R8 mill spindle is driven by a belt system rather than gear driven for one quite operation and two ease of maintenance. Checkout specs below!

Comes with:

1/2" Drilling chuck and R8 shank
Oil bottle
3 Hex wrenches
3 open end wrenches
D:45-52 Spanner wrench
T-nuts
Drawbar
Extra 5A fuse


Specifications

Max. X-axis Travel ...... 8.5" (215.9mm)
Max. Y-axis Travel ...... 4" (101.6mm)
Max. Z-axis Travel ...... 7" (177.8mm)
Headstock Tilt ............ -+ 45 degrees
Motor Power ............... 500 watts
Hours Power .............. 0.67
Spindle Speed ............ 0-2500 rpm
Spindle Taper................. R8
Stock Chuck Taper ....... JT33
Drill Cuck Capacity ....... 1/2" (13mm)
Endmill Capacity ........... 1/2" (13mm)
Face Milling Capacity ... 1" (25.4mm)
Total Gross weight ....... 127 lbs.
T-Slots Specs ............... See Page 3 of Manual
Instructions

MicroLux® High Precision Heavy Duty R8 Miniature Milling Machine Instructions

MicroLux® High Precision Heavy Duty R8 Miniature Milling Machine Assembly

MicroLux® High Precision Heavy Duty R8 Miniature Milling Machine Parts Diagram
Shipping & Returns

We hope you will be completely satisfied with your order...but, if an item does not meet your expectations, you may return it in as-new condition within 30 days of delivery for a replacement, exchange or refund of the purchase price.
Estimate shipping

A Micro-Mark Best Seller !

Tried and true by customers just like you, this item is one of our best sellers!

You may want to know...


Brand: MicroLux

Item Weight: 125 lb

Item Dimensions: 22.04 x 29.13 x 19.68 inches

List Price: $1,800

Manufacturer ETA:

Most orders are shipped complete within 2 business days; however, if we must ship a partial order due to an out-of-stock situation, merchandise will not be charged to your credit card until shipment is made.

We hope you will be completely satisfied with your order...but, if an item does not meet your expectations, you may return it in as-new condition within 30 days of delivery for a replacement, exchange or refund of the purchase price.

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael Thompson
Great Mini-Mill, you will not regret it.

I bought this when it was 899.00, I have enjoyed using this machine because I use to be a Tool & Die maker. I am no longer one yet I do very much like using this mini-mill because it has the strength to cut metal but I would recommend keeping it to mild steel or softer.
Saying that, this little guy can cut aluminum all day long and not have a problem. If you are a professional tool maker then you may not need a digital speed readout for your spindle but since this guy is small and speed does make a big difference, I do recommend it to save you a lot of time getting the correct speed.
I recommend the Microlux High Precision Heavy Duty R8 miniature milling machine. It is a very good machine to have in your garage or shed because it is small but very useful and it only requires 110-120v outlet.
Make sure you grease down everything when not using it, after all it is steel and will rust in high humidity states.
Rotary table with 4 jaw independent chuck will be my next purchase.

A
Anonymous
High Quality and easy to use

This Mini Mill is stable, solid, abd easy to use. The R8 tooling makes for easy and quick bit changes. I mill mild steed for Tattoo Machines and have had 0 issues

P
Pablo Prieto
Muy til.

Wonderful Milling Machine, with performance suitable for working in mendelism.

A pity that I do not find in Spain distributors who put it up for sale, and buying it as an import represents a large increase in the price for taxes.

Load More
Recently Viewed
My Wishlist