Protopasta 50g Coil Matte Fiber HTPLA - Green Filament, 1.75mm

Finish Printed parts have a low luster, textured surface which creates a highly desirable contrast between light and shadow. Texture, color, and sheen can be somewhat manipulated by printer settings as well as post-processing. Printed parts can also be smoothed or weathered with paint for alternate aesthetics. The plant-based fibers lend well to adhesion of paint and other aesthetic coatings. Performance Based on Proto-pasta HTPLA, this Matte Fiber version can be heat treated to retain more stiffness to higher temperatures. Dimensional stability is improved compared to HTPLA without fibers. The plant-based fibers improve adhesion of glues and coatings. Performance is similar to Carbon Fiber HTPLA but processing of Matte Fiber does NOT require a wear resistant nozzle. Compatibility No special hardware or nozzles are required for this plant-based composite. This material is not overly brittle, but is stiff and will break under excessive load. It prints like PLA on non-heated beds. Suggested print temperature is 190-230C, but we had good luck with a slow 1st layer at 230C on cold blue tape and 210C thereafter for a balance of strength and aesthetic. This material does absorb moisture and dry filament is recommend for best results. When saturated with moisture, this material oozes more readily. Lowering flow and/or temperatures can minimize oozing and improve detail, though higher temperatures are recommended for best mechanical properties. With higher temperatures, ooze artifacts can be removed post build. Finishing This material can be shaved/carved with a sharp blade for a smooth finish. Experiment with weathering or other painting techniques for a unique look. Also, expect improved bonding strength with glue compared to plastic without fiber.

We hope you will be completely satisfied with your order...but, if an item does not meet your expectations, you may return it in as-new condition within 30 days of delivery for a replacement, exchange or refund of the purchase price.

--- Anguilla Antigua & Barbuda Argentina Aruba Australia Austria Bahamas Barbados Belgium Belize Bermuda Bolivia Brazil British Virgin Islands Canada Caribbean Netherlands Cayman Islands Chile China Colombia Costa Rica Croatia Curaçao Czechia Denmark Dominica Dominican Republic Ecuador Egypt El Salvador Falkland Islands Finland France French Guiana Germany Greece Greenland Grenada Guadeloupe Guatemala Guyana Haiti Honduras Hong Kong SAR Hungary India Ireland Israel Italy Jamaica Japan Liberia Luxembourg Malaysia Malta Martinique Mexico Montserrat Morocco Netherlands New Zealand Nicaragua Norway Panama Paraguay Peru Philippines Poland Portugal Romania Singapore Sint Maarten South Africa South Georgia & South Sandwich Islands South Korea Spain Sri Lanka St. Barthélemy St. Kitts & Nevis St. Lucia St. Martin St. Pierre & Miquelon St. Vincent & Grenadines Suriname Sweden Switzerland Thailand Trinidad & Tobago Türkiye Turks & Caicos Islands U.S. Outlying Islands Ukraine United Arab Emirates United Kingdom United States Uruguay Venezuela Country

Province

Zip code

Estimate