El mini torno MicroLux ® 7 x 16 ¡La única máquina "TRUE INCH" de su tipo en el mercado!
Una exclusiva de Micro-Mark; la única máquina “True Inch” de su tipo
Potente motor sin escobillas de 500 vatios con interruptor reversible
Cree acabados finos en torneados de hasta 7 pulgadas de diámetro y 16 pulgadas de largo.
Muchas actualizaciones y accesorios adicionales disponibles
Alimentación eléctrica del carro con juego de engranajes de cambio para roscado, mandril autocentrante de 3 mordazas y más
ADVERTENCIA: Este producto puede exponerlo a sustancias químicas, incluido el plomo, que el estado de California reconoce como causante de cáncer, defectos de nacimiento u otros daños reproductivos. Para obtener más información, visite: www.p65warnings.ca.gov
Más detalles del producto
This mini lathe has true imperial (inch) feed screws and dials (.050 inch per turn), so metric conversions are not required.
The MicroLux® 7 x 16 Mini Lathe is so versatile it will cut all metals, including carbon steel, stainless steel, cast iron, aluminum, brass, copper, bronze, and nickel-silver, plus non-metals such as wood and plastic. And, with the optional accessories sold separately, it will perform virtually any task you'll ever need.
Careful workmanship gives you high dimensional accuracy and long life, and smooth operation lets you put fine finishes on turnings up to 7 inches in diameter and 16 inches long. Yet, it's compact enough (just 86 pounds) to be portable.
Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S. or call our order line for assistance.
The MicroLux® 7 x 16 Mini Lathe is not just a stretched version of older 7 x 10 and 7 x 12 mini lathes, but has new design elements required for bigger jobs.
What's included?
3-Jaw self-centering headstock chuck (see below for specifications)
External jaw set for the 3-jaw headstock chuck
chuck key
MT3 tailstock dead center
3 Hex key's
2 open-end wrenches
Change gear set
1 extra fuse
Plastic oil container
Specifications:
Maximum Swing over bed ........... 7" diameter
Distance between centers .......... 16"
Spindle taper .............................. Morse Taper No. 3 (MT3)
Tailstock taper ............................ Morse Taper No. 2 (MT2)
Spindle bore ................................ 0.787" (20 mm)
Cross slide travel ......................... 2.559" (65 mm)
Compound slide travel ................. 2.165" (55 mm)
Spindle speed range .................... 0 to 2500 rpm approx.
Thread cutting ............................. 12 to 52 TPI in 18 steps
Motor Power ................................ 500 Watts, 0.67 hp
Final Drive .................................... Mesh belt
Lead Screw Thread ...................... ACME 5/8" - 16 TPI
Cross slide thread ........................ ACME 3/8" - 16 TPI
Compound Rest Thread ............... ACME 3/8" - 16 TPI
3-Jaw self-centering chuck specifications:
Body dia. ..................................... 3.150 inches
Internal jaw clamping range ........ 0.79 to 0.866 inches;
Internal jaw jamming range ......... 0.984 to 2.756 inches;
External jaw clamping range ....... 0.866 to 2.480 inches;
Thru-hole ..................................... approx. 5/8 dia.
Esperamos que esté completamente satisfecho con su pedido... pero, si un artículo no cumple con sus expectativas, puede devolverlo como nuevo dentro de los 30 días posteriores a la entrega para un reemplazo, cambio o reembolso del precio de compra.
Estimación de envío
A Micro-Mark Best Seller
!
Tried and true by customers just like you, this item is one of our best sellers!
Contenido con pestañas
Marca: SHANGHAI INTER-SIEG CO
Agregue una breve descripción para esta sección con pestañas
Agregue una breve descripción para esta sección con pestañas
I bought this lathe in 2013 and I have been using pretty regularly for the past 6 years. I have had very little trouble with it. Remember it is not a production toolroom lathe, it is a mini lathe. Treat it right and it will treat you right. I also have three other mini lathes of different brandings. I use them to give lathe training occasionally. But my Micro Mark 7x16 is the lathe I use year around. The motor is far superior to to others and this one is much quieter. The longer bed way is such a luxury. Think of it as going from a twin size bed to a king size bed. (My first lathe was a 7x10).
C
Chuck H.
Excellent Lathe - you will appreciate the added (16") working length
I was a bit concerned when I found out that the MicroLux 7 by 16 lathe is not assembled and tested by Micro-Mark prior to shipping it to me worried about missing or damaged parts. However, I went forward with the purchase and have no regrets. The lathe arrived in two large packages with several smaller packages inside. The protective boxes and inner padding was well done and all arrived without damage. In addition all parts were included no missing parts. Assembly instructions were excellent and assembly went smoothly it took me about 2.5 hours which I probably could reduce to 1.5 if I did it again. At this point I have about 10 hours on the lathe and I am very impressed. Everything works properly and, for me, it meets my standard for precision.
W
William L.O.
Great machine tool that has never given me problems
I have the older 7 x12 inch lathe and have had it for a number of years. I'm no expert machinist but this lathe is very well built and has given me no problems in the years I have owned it. I have machined some tooling for pyrotechnics and it has worked well (the lathe and the tooling I produced). For a hobbyist grade lathe, don't let the title fool you. You can produce some excellent parts in this lathe with the proper knowledge and patience to learn.
ADVERTENCIA: Este producto puede exponerlo a sustancias químicas, incluido el plomo, que el estado de California reconoce como causante de cáncer, defectos de nacimiento u otros daños reproductivos. Para obtener más información, visite: www.p65warnings.ca.gov
