Reciprocating Carving Hand Piece

Pieza de mano para tallar alternativo

Name: Pieza de mano para tallar alternativo
Brand: FOREDOM ELECTRIC CO
SKU: 90118
Price: 76.95 USD
Availability: OutOfStock

$76.95 USD Agotado

Los gastos de envío se calculan en la pantalla de pago.

SKU

90118

Variantes de producto

Pieza de mano para tallar alternativo

Esta pieza de mano de cincel alternativo sirve para tallar todo tipo de madera, plástico, yeso y piedra blanda para tallar. Se conecta a una máquina de eje flexible de desconexión rápida con punta de llave como nuestra 85288. Simplemente retire la pieza de mano del cable (con el motor desenchufado) e inserte esta pieza de mano en su lugar. El mango convierte la acción giratoria del cable accionado en una pieza de mano de tipo "martillo" alternativo que requiere una ligera presión para iniciar la acción del cincel de martilleo. ¿Tiene una longitud de carrera de 1/8? (3,2 mm). El cilindro de plástico texturizado y el extremo frontal de aluminio cónico brindan comodidad y no generan golpes en la mano del usuario.

Más detalles del producto

For optimum performance use between 1,000 – 8,000 RPM.

TIP: We also recommend using a dial speed control, in place of a foot pedal, to run steady within the recommended lower end of the speed range of our 85288. See our 88343 Table Top Speed Control.

Handpiece Specifications:

6″ long, 1″ diameter

4.6 oz, (6.65 oz packaged weight)

Includes 6 chisels that have 18mm long tangs and 55mm and

75mm overall lengths – from cutting edge to end of tang. and includes: 3/8” straight, 11/32 45° skew, ¼” V gouge and 3/8” wide #3, #7 and 3/16” #10 U gouges

Also includes lube, collet wrench and instructions.

Must only be used in a forward motor direction only such as our 85288 Flex Shaft Machine the normally spins the hand piece chuck counter-clockwise.

Instrucciones

Envío y devoluciones

Esperamos que esté completamente satisfecho con su pedido... pero, si un artículo no cumple con sus expectativas, puede devolverlo como nuevo dentro de los 30 días posteriores a la entrega para un reemplazo, cambio o reembolso del precio de compra.

Estimación de envío

País

Código postal

Contenido con pestañas

Marca: FOREDOM ELECTRIC CO

Agregue una breve descripción para esta sección con pestañas

Great transaction, super fast delivery, perfect communication, all at a great price for a beautiful locomotive! What more can you ask for ? And this Atlas GP40 is a total beast! Thanks Micro-Mark!

Great tool!

Good quality foam clay

Unlike any air dry clay I've used .
Very easy to manipulate , doesn't stick to your fingers .
Can be made into paper thin sheets that hold their shape .

Thick sections will take well over 24 hours to dry out ; high water weight when fresh .
Evaporation slows down considerably once the outer " crust " dries on thick pieces .

After 24 hours @ 78 degrees and about 60% humidity , the 3.1 gram sample I experimented with weighs 1.2 grams .
.. and after 48 hrs weighs just 1/2 gram ,, and I don't think it's fully dry yet .

Definitely worth the price .
Very versatile .

My only complaint is the bag it comes in .
It is a zipper lock bag but you need to remove a fair amount of the product before you'll be able to engage the zipper .
It's stuffed full when new .
I fit the bag into a plastic container ( Folgers coffee 43.5oz can ) with an inch of water at the bottom to ensure it doesn't dry out until I use enough to be able to close the bag .
Most likely keep it in that can regardless , just to be safe .

Pieza de mano para tallar alternativo

Pieza de mano para tallar alternativo

Contenido con pestañas

Customer Reviews

Let customers speak for us