Fortificante líquido Hot Wire Foam Factory Boost, 16 oz

MIXING: Mix with 50% water for maximum strength. Thin more where less strength is needed. Always add the Foam Coat to the liquid. Start with 1 part liquid to 3 parts Foam Coat, and thin or thicken as desired. Thinning the Foam Coat with more Boost will not weaken it.

APPLYING: Fill large cracks and holes with pasty mixture. To coat large areas, add more liquid until thin enough to apply with a paint brush. May be applied as thick as 3/8 inch, but multiple coats are stronger. Try texturing surface before coating sets.

SET TIME: Use within 10 minutes. Sets hard in 30 minutes. Add acrylic paint to extend use time. Maximum bond and hardness in 24 hours.

CLEAN-UP: Immediately clean tools and brushes with soapy water. Boost cannot be removed once dry.

FINISHING: May be painted or stained.



Suggested Dilutions Boost : Water

Super Strong 1 : 1

Very Strong 1 : 2

Strong 1 : 3

Note: This item ships direct from California to contiguous 48 states only.

Esperamos que esté completamente satisfecho con su pedido... pero, si un artículo no cumple con sus expectativas, puede devolverlo como nuevo dentro de los 30 días posteriores a la entrega para un reemplazo, cambio o reembolso del precio de compra.

--- Alemania Australia Austria Bélgica Canadá Chequia Corea del Sur Dinamarca Emiratos Árabes Unidos España Estados Unidos Finlandia Francia Irlanda Israel Italia Japón Malasia Noruega Nueva Zelanda Países Bajos Polonia Portugal RAE de Hong Kong (China) Reino Unido Singapur Suecia Suiza País

Provincia

Código postal

Estimación