Fortificante líquido Hot Wire Foam Factory Boost, 16 oz
SKU
¿Espuma a prueba de balas? Todavía no, pero esto es lo más cerca que podrás llegar. Cuando el fortificante líquido Boost se mezcla con Hotwire Foam Coat (#87642 o #87643), lo hace increíblemente fuerte y resistente a la intemperie, ¡además hace que se adhiera a casi cualquier cosa!
Product specifications
| Brand | |
|---|---|
| Weight | |
| Dimensions | N/A |
| Warranty | |
| Back in Stock Date | N/A |
Instrucciones
Envío y devoluciones
Esperamos que esté completamente satisfecho con su pedido... pero, si un artículo no cumple con sus expectativas, puede devolverlo como nuevo dentro de los 30 días posteriores a la entrega para un reemplazo, cambio o reembolso del precio de compra.
More Information:
MIXING: Mix with 50% water for maximum strength. Thin more where less strength is needed. Always add the Foam Coat to the liquid. Start with 1 part liquid to 3 parts Foam Coat, and thin or thicken as desired. Thinning the Foam Coat with more Boost will not weaken it.
APPLYING: Fill large cracks and holes with pasty mixture. To coat large areas, add more liquid until thin enough to apply with a paint brush. May be applied as thick as 3/8 inch, but multiple coats are stronger. Try texturing surface before coating sets.
SET TIME: Use within 10 minutes. Sets hard in 30 minutes. Add acrylic paint to extend use time. Maximum bond and hardness in 24 hours.
CLEAN-UP: Immediately clean tools and brushes with soapy water. Boost cannot be removed once dry.
FINISHING: May be painted or stained.
Suggested Dilutions Boost : Water
Super Strong 1 : 1
Very Strong 1 : 2
Strong 1 : 3
Note: This item ships direct from California to contiguous 48 states only.
