Hot Wire Foam Factory Exterior Foam Coat, 25 lbs.

Capa de espuma exterior de fábrica de espuma de alambre caliente, 25 lbs.

Name: Capa de espuma exterior de fábrica de espuma de alambre caliente, 25 lbs.
Brand: HOT WIRE FOAM FACTORY INC
SKU: 87645
Price: 59.95 USD
Availability: InStock

$59.95 USD

Los gastos de envío se calculan en la pantalla de pago.

SKU

87645

Variantes de producto

Quantity

Acabado duro como una roca para todos sus proyectos de espuma en exteriores (e interiores). Esto es súper difícil. No se puede lijar. Tiene una sensación de piedra áspera cuando está seco. Se puede alisar con llana o cepillar para obtener un acabado súper rugoso.

Características:

Se adhiere a espumas de poliestireno.
Forma una superficie resistente a la intemperie.
Fácil de mezclar. Solo agrega agua.
Utilice por encima o por debajo del nivel del suelo.
Aplicar con brocha o llana.
Pintable.
Incombustible.
Se pueden crear muchas texturas superficiales decorativas.
Limpieza con agua y jabón.
Agregue el fortificante Boost si desea fuerza adicional. (No funcionará con Bounce).

Más detalles del producto

MIXING: Settling may occur in shipping causing a gritty texture that does not stick well. Remix if there is separation in dry mixture. Use when temperatures are between 40°F (4°C) and 100°F (38°C). Mix in a clean container with clean water. Add about 3 parts powder to 1 part water and mix until Foam Coat turns to a smooth paste. A drier mix is stronger. Do not overmix.

APPLYING: If using extruded foam (ie Blueboard or Pinkboard) roughen surface with coarse sandpaper. Fill big cracks and holes by applying pasty mixture with a trowel. You may add more water until mixture is thin enough to apply with a paint brush, although thinning weakens coating. Can be applied with a standard spray hopper. Use thinned mixture to texture large areas. For best strength apply at least 1/4" (6mm) thick. Multiple coats may be applied. Try texturing surface before coating sets.

SET TIME: Use within 30 minutes. Sets up in 1-3 hours. Fogging the surface for 24 hours will increase strength.

FINISHING: Remove dust before painting. This product goes on rough and is not sandable. Finish as the surface is setting up.

CLEAN-UP: Clean tools and brushes with clean soapy water before coating hardens.

WARNING: Avoid prolonged contact with skin. Wear dust, skin and eye protection. Use approved respirator when sanding. In case of eye contact, flush immediately with water, consult a physician. Wash hands with soap and water after use and before eating. Keep out of reach of children.

3 LBS. COVERAGE:

1/64" thick, 36 square feet

1/16" thick, 9 square feet

1/4" thick, 2.25 square feetNote: This item ships direct from California to contiguous 48 states only.

Instrucciones

Envío y devoluciones

Esperamos que esté completamente satisfecho con su pedido... pero, si un artículo no cumple con sus expectativas, puede devolverlo como nuevo dentro de los 30 días posteriores a la entrega para un reemplazo, cambio o reembolso del precio de compra.

Estimación de envío