Threading Die 8-32 NC
SKU
Micro-Mark offers a selection of hard-to-find miniature taps, dies and bits for a wide variety of projects, including model building, clock-making, instrument repair and fabrication, watches, machining and machine work, component assembly, and more. Dies are used to cut screw threads into the surface of a smooth rod or other cylindrical stock. They can also be used to repair threads on damaged screws. Dies are 13/16" outside diameter and are adjustable for thread fit allowance.
Die & Rod Size Reference 00-90 Die / .047" Rod • 0-80 Die / .060" Rod • 1-72 Die / .073" Rod • 2-56 Die / .086" Rod • 3-48 Die / .099" Rod • 4-40 Die / .112" Rod • 6-32 Die / .138" Rod • 8-32 Die / .164" Rod
See the chart below for Tap, Die and Drill size reference. For additional information, an explanation of Taps and Dies follows the chart.
|
Tap and Die sizes follow the same naming standards as machine screws; shank size - threads per inch. For example, a cylinder threaded with a 0-56 tap would hold a size 0, 56 thread-per-inch screw.
Taps and Dies Explained
TAPS are used to cut screw threads into the walls of a previously smooth cylindrical hole or bore.
DIES are used to cut screw threads into the surface of a smooth rod or other cylindrical stock.
TAP DRILLS are bits of a precise size which are used to bore out cylindrical holes in a material or component before creating screw threads with a corresponding-size tap.
CLEARANCE DRILLS are bits of the correct size for drilling a hole just large enough for the shank of a corresponding-size screw to pass through without touching, such as the hole in a washer. The holes made by clearance drills are not to be tapped.
Example: Use a 00-09 Tap Drill to make a hole in a component which must be joined to another component. Create screw threads in the hole previously drilled into the component with a 00-90 Tap. Use a 00-90 Die to cut threads into a bit of brass rod, making a custom screw. Using a 00-09 Clearance Drill, bore a hole in a circle of brass to create a washer that will be placed between the head of the custom screw and the component.
Más detalles del producto
Instrucciones
Envío y devoluciones
Esperamos que esté completamente satisfecho con su pedido... pero, si un artículo no cumple con sus expectativas, puede devolverlo como nuevo dentro de los 30 días posteriores a la entrega para un reemplazo, cambio o reembolso del precio de compra.
Estimación de envío
Contenido con pestañas
Marca: SMI
Agregue una breve descripción para esta sección con pestañas
Agregue una breve descripción para esta sección con pestañas