MicroLux® 7x16 Mini Lathe

$1,599.95 USD
Shipping calculated at checkout.

SKU

84631

Super Buy!

The MicroLux® 7 x 16 Mini Lathe, The only "TRUE INCH" machine of its kind on the market!

 

  • Powerful brushless 500-watt motor, 
  • Electronically controlled variable speed, forward and reverse,
  • Belt drive for extra quite operation,
  • Turnings up to 7 inches in diameter and 16 inches in length creating a fine finish,
  • Carriage power feed with change-gear set for cutting threads, and more!

Want to learn more? check out the More Product Details tab below!

WARNING: This product can expose you to chemicals, including Lead which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to:www.p65warnings.ca.gov

More Product Details

This mini lathe has true imperial (inch) feed screws and dials (.050 inch per turn), so metric conversions are not required.

The MicroLux® 7 x 16 Mini Lathe is so versatile it will cut all metals, including carbon steel, stainless steel, cast iron, aluminum, brass, copper, bronze, and nickel-silver, plus non-metals such as wood and plastic. And, with the optional accessories sold separately, it will perform virtually any task you'll ever need.

Careful workmanship gives you high dimensional accuracy and long life, and smooth operation lets you put fine finishes on turnings up to 7 inches in diameter and 16 inches long. Yet, it's compact enough (just 86 pounds) to be portable.

Use our website shopping cart to calculate freight charge for shipments outside 48 contiguous U.S. or call our order line for assistance.

The MicroLux® 7 x 16 Mini Lathe is not just a stretched version of older 7 x 10 and 7 x 12 mini lathes, but has new design elements required for bigger jobs.


What's included?

3-Jaw self-centering headstock chuck (see below for specifications)
External jaw set for the 3-jaw headstock chuck
chuck key
MT3 tailstock dead center
3 Hex key's
2 open-end wrenches
Change gear set
1 extra fuse
Plastic oil container


Specifications:

Maximum Swing over bed ........... 7" diameter
Distance between centers .......... 16"
Spindle taper .............................. Morse Taper No. 3 (MT3)
Tailstock taper ............................ Morse Taper No. 2 (MT2)
Spindle bore ................................ 0.787" (20 mm)
Cross slide travel ......................... 2.559" (65 mm)
Compound slide travel ................. 2.165" (55 mm)
Spindle speed range .................... 0 to 2500 rpm approx.
Thread cutting ............................. 12 to 52 TPI in 18 steps
Motor Power ................................ 500 Watts, 0.67 hp
Final Drive .................................... Mesh belt
Lead Screw Thread ...................... ACME 5/8" - 16 TPI
Cross slide thread ........................ ACME 3/8" - 16 TPI
Compound Rest Thread ............... ACME 3/8" - 16 TPI


3-Jaw self-centering chuck specifications:

Body dia. ..................................... 3.150 inches
Internal jaw clamping range ........ 0.79 to 0.866 inches;
Internal jaw jamming range ......... 0.984 to 2.756 inches;
External jaw clamping range ....... 0.866 to 2.480 inches;
Thru-hole ..................................... approx. 5/8 dia.

Instructions
Shipping & Returns

We hope you will be completely satisfied with your order...but, if an item does not meet your expectations, you may return it in as-new condition within 30 days of delivery for a replacement, exchange or refund of the purchase price.

Estimate shipping

A Micro-Mark Best Seller !

Tried and true by customers just like you, this item is one of our best sellers!

You may want to know...


Brand: MicroLux

Item Weight: 102 lb

Item Dimensions: 34 x 14 x 13 inches

List Price: $1800

Manufacturer ETA:

Most orders are shipped complete within 2 business days; however, if we must ship a partial order due to an out-of-stock situation, merchandise will not be charged to your credit card until shipment is made.

We hope you will be completely satisfied with your order...but, if an item does not meet your expectations, you may return it in as-new condition within 30 days of delivery for a replacement, exchange or refund of the purchase price.

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
ANDY DENNISON
My Luxury Lathe

I bought this lathe in 2013 and I have been using pretty regularly for the past 6 years. I have had very little trouble with it. Remember it is not a production toolroom lathe, it is a mini lathe. Treat it right and it will treat you right. I also have three other mini lathes of different brandings. I use them to give lathe training occasionally. But my Micro Mark 7x16 is the lathe I use year around. The motor is far superior to to others and this one is much quieter. The longer bed way is such a luxury. Think of it as going from a twin size bed to a king size bed. (My first lathe was a 7x10).

C
Chuck Hein
Excellent Lathe - you will appreciate the added (16") working length

I was a bit concerned when I found out that the MicroLux 7 by 16 lathe is not assembled and tested by Micro-Mark prior to shipping it to me worried about missing or damaged parts. However, I went forward with the purchase and have no regrets. The lathe arrived in two large packages with several smaller packages inside. The protective boxes and inner padding was well done and all arrived without damage. In addition all parts were included no missing parts. Assembly instructions were excellent and assembly went smoothly it took me about 2.5 hours which I probably could reduce to 1.5 if I did it again. At this point I have about 10 hours on the lathe and I am very impressed. Everything works properly and, for me, it meets my standard for precision.

W
William L Osburn
Great machine tool that has never given me problems

I have the older 7 x12 inch lathe and have had it for a number of years. I'm no expert machinist but this lathe is very well built and has given me no problems in the years I have owned it. I have machined some tooling for pyrotechnics and it has worked well (the lathe and the tooling I produced). For a hobbyist grade lathe, don't let the title fool you. You can produce some excellent parts in this lathe with the proper knowledge and patience to learn.

Recently Viewed
My Wishlist