Rebound 25 Brush-On Platinum Silicone Rubber, Trial Size, 2lb

Note: These products will not work under any circumstances with modeling clays containing sulfur.Instructions:

Safety Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber.



Store and use material at room temperature (73°F/23°C). Warmer temperatures will drastically reduce working time and cure time. Storing material at warmer temperatures will also reduce the usable shelf life of unused material. These products have a limited shelf life and should be used as soon as possible.



Cure Inhibition The curing of silicone rubber may be inhibited by certain contaminants in or on the pattern to be molded resulting in tackiness at the pattern interface or a total lack of cure throughout the mold. Latex, sulfur clays, certain wood surfaces, newly cast polyester, epoxy or urethane rubber my cause inhibition. If compatibility between the rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount of rubber onto a non-critical area of the pattern. Inhibition has occurred if the rubber is gummy or uncured after the recommended cure time has passed. To prevent inhibition, one or more coatings of a clear acrylic lacquer applied to the model surface is usually effective. Allow any sealer to thoroughly dry before applying rubber.



Important: Even with a sealer, Rebound™ will not work with modeling clays containing sulfur. If you are not sure if your clay contains sulfur, do a small compatibility test before using for an important project.



Applying A Release Agent Although not usually necessary, a release agent will make demolding easier when casting into most surfaces. Ease Release #86627  is a proven release agent for releasing silicone from silicone or other surfaces.



Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.

Rebound 25 Brush-On Platinum Silicone Rubber, Trial Size, 2lb

We hope you will be completely satisfied with your order...but, if an item does not meet your expectations, you may return it in as-new condition within 30 days of delivery for a replacement, exchange or refund of the purchase price.

--- Anguilla Antigua & Barbuda Argentina Aruba Australia Austria Bahamas Barbados Belgium Belize Bermuda Bolivia Brazil British Virgin Islands Canada Caribbean Netherlands Cayman Islands Chile China Colombia Costa Rica Curaçao Czechia Denmark Dominica Dominican Republic Ecuador Egypt El Salvador Falkland Islands Finland France French Guiana Germany Greece Greenland Grenada Guadeloupe Guatemala Guyana Haiti Honduras Hong Kong SAR Hungary India Ireland Israel Italy Jamaica Japan Liberia Luxembourg Malaysia Malta Martinique Mexico Montserrat Morocco Netherlands New Zealand Nicaragua Norway Panama Paraguay Peru Philippines Poland Portugal Romania Singapore Sint Maarten South Africa South Georgia & South Sandwich Islands South Korea Spain Sri Lanka St. Barthélemy St. Kitts & Nevis St. Lucia St. Martin St. Pierre & Miquelon St. Vincent & Grenadines Suriname Sweden Switzerland Thailand Trinidad & Tobago Türkiye Turks & Caicos Islands U.S. Outlying Islands Ukraine United Arab Emirates United Kingdom United States Uruguay Venezuela Country

Province

Zip code

Estimate