Wearable Lighting by Micro-Mark

Micro-Mark has introduced a line of wearable lights that allow you to see in hard-to-reach spots. These novel lights

The lights have a wide range of value for makers working in precision repair, modeling, robotics, home machine shops, special effects and prop-making studios, jewelry and watchmaking, miniaturists or any profession or craft that requires the use of precision. The lights can also be used for DIY, jogging or walking, household chores, and more. Each are USB rechargeable and these lights are exclusive at Micro-Mark

For more detail on each; one through five.

#1HandyBRYTE glove light

HandyBRYTE™ glove-mounted light literally puts brilliant lighting at your fingertips. Aim the LEDs exactly where you need them while you work without impeding dexterity. Super light-weight, highly flexible fabric is very comfortable and moves with you, and the hook-and-loop closure wrist strap easily adjusts for optimal fit. Includes one pair of HandyBRYTE gloves with two LED lights on each, on-board USB rechargeable 3.7V lithium-ion battery, and USB charging cable. One size fits all.

#2 MicroBRYTE next generation lighting

MicroBRYTE™ puts incredibly brilliant, sharp-focused, color-adjustable LED lighting wherever you want it to go, no cords, no cables, no boundaries! At less than 1" in diameter and 12" long, this versatile "magic wand" of light gives off virtually zero heat, fits just about anywhere you need it, and can be hand-held or mounted to shine its amazingly bright 200 lumen beam up, down and sideways.

Thanks to a high-capacity 3.7V rechargeable lithium-ion battery and sturdy metal housing, MicroBRYTE is not only a long-lasting illumination workhorse in the shop, the home and even the outdoors, it looks great doing it, with its high-quality satin nickel metallic finish. Touch-control button activates the LEDs and allows the user to switch between neutral white 4000K, cool "daylight" 6500K, and warm 3000K light.

Once you've made your color temperature selection, press and hold the button to control the brightness from 2% to 100% with its built-in dimmer. Work for up to 10 continuous hours with the dimmer at 50%, or up to 4 hours at 100%; then use the included USB cable to recharge from any convenient power source. In 2 to 3 hours, you're ready to do it all again. Or, leave it plugged in and let the light shine on as long as you wish.

#3BRYTE Eyes LED illuminated magnifying glasses

These classically-styled, +2.5-strength magnifying glasses bring a new level of clarity to your vision while you work, read, inspect, etc. Twin side-mounted LEDs are optimally placed to eliminate glare and eye strain while illuminating that which you are viewing in bright, crisp, focused light. Great for reading the Micro-Mark catalog.

Scratch-resistant, hard plastic lenses are mounted in durable, sleek, black acetate frames, so they go where you go and look good doing it. Includes built-in USB rechargeable battery that provides up to 2.5 hours of light on a single one-hour charge, discreet On/Off switch, and special twin-plug USB charging cable.

#4 BRYTEband LED Headband Light

Wherever you go, wherever you look, BRYTE BandTM lights the way - even in the rain! This ingenious, water-resistant device is the next-level Headband Lighting System. 300 Lumen ultra-bright, high-efficiency COB and XPE LEDs mounted in a durable, stretchable and comfortable silicone headband illuminate up to 150 feet away with a 230-degree field of vision.

A single switch activates five different modes, allowing you to select between maximum or standard brightness of both the front-mounted LED light strip and the side-mounted single LED, plus a strobe mode which flashes both simultaneously.

Also features a side-mounted sensor which can turn the lights on and off with a wave of your hand. Built-in 3.7V USB rechargeable lithium polymer battery provides 2.5 to 8 hours working time. Includes USB charging cable. Fully-adjustable band ensures that one size fits all.

#5PocketBRYTE LED Penlight

At only a little over 5" long and just .5" in diameter, PocketBRYTETM may be the smallest of the BRYTE Line, but don't let its tiny size fool you - the beam of light it puts out will surprise you with its brilliance and clarity from across the room and beyond. Includes light-weight, non-magnetic stainless steel body, On/Off switch, pen clip, wrist strap and USB charging cable. Bring the light anywhere and everywhere you go with PocketBRYTE.

Great transaction, super fast delivery, perfect communication, all at a great price for a beautiful locomotive! What more can you ask for ? And this Atlas GP40 is a total beast! Thanks Micro-Mark!

Great tool!

Good quality foam clay

Unlike any air dry clay I've used .
Very easy to manipulate , doesn't stick to your fingers .
Can be made into paper thin sheets that hold their shape .

Thick sections will take well over 24 hours to dry out ; high water weight when fresh .
Evaporation slows down considerably once the outer " crust " dries on thick pieces .

After 24 hours @ 78 degrees and about 60% humidity , the 3.1 gram sample I experimented with weighs 1.2 grams .
.. and after 48 hrs weighs just 1/2 gram ,, and I don't think it's fully dry yet .

Definitely worth the price .
Very versatile .

My only complaint is the bag it comes in .
It is a zipper lock bag but you need to remove a fair amount of the product before you'll be able to engage the zipper .
It's stuffed full when new .
I fit the bag into a plastic container ( Folgers coffee 43.5oz can ) with an inch of water at the bottom to ensure it doesn't dry out until I use enough to be able to close the bag .
Most likely keep it in that can regardless , just to be safe .

Wearable Lighting by Micro-Mark

8 Most Popular Wooden Ship Model Kits at Micro-Mark

Deja un comentario

Let customers speak for us